Cisco Packettracer: Problem with simple BGP-Configuration
- Details
- Category: TechBlog
Packettracer: Problem with simple BGP configuration
Apr 2015
V 1.0
Version of Packettracer: 6.2.0.xx
Configuration:
- Connection of 2 AS via BGP
Problem:
- If BGP is configured with neighbor and network command only, the BGP routes are not propagated to the neighbour router, although adjacency is built!
Solution:
- Configure the specific networks with the mask extension, e.g. network 1.1.1.0 mask 255.255.255.0